Updated November 2026
A french press for yerba mate lets you steep loose-leaf mate in a way that feels familiar to anyone who already owns one for coffee. You’ll get a smooth, full-bodied cup without the sharp bitterness that comes from letting the leaves sit too long or brewing them too hot. The method takes about five minutes once you know the basic ratio and timing.
What You Need Before You Start
Yerba mate is a leaf, not a bean, so it needs a coarser cut and a gentler approach than most coffee. Gather these items before you begin:
Shopping for one? See our guide: Bodum Brazil French Press 8 Cup Review (2026).
- A french press with a metal mesh filter, preferably one with a fine-to-medium screen
- Loose-leaf yerba mate, ideally a cut labeled as “fine” or “medium” rather than the very dusty sweepings
- A kettle or thermometer that can hold water between 160°F and 180°F
- A measuring spoon or small kitchen scale
- A timer
How to Brew Yerba Mate in a French Press
Start with a ratio of roughly 1 tablespoon (about 5 grams) of yerba per 8 ounces of water. Adjust from there once you know how strong you like it. Stronger brews call for more leaf, not longer steeping.
- Heat the water. Bring water to a boil, then let it rest for 2 to 3 minutes until it drops to about 170°F to 180°F. Boiling water scorches the leaves and makes the cup harsh.
- Add the yerba. Put the measured leaves directly into the empty press. Loose leaves need room to expand, so don’t fill the carafe more than halfway with dry mate.
- Pour and steep. Add the hot water slowly, then set the timer for 3 to 4 minutes. Keep the lid on but leave the plunger raised.
- Press gently. Push the plunger down slowly and steadily over about 10 seconds. Pressing too fast pushes fine particles through the mesh.
- Pour and serve. Decant everything into your cup or a thermos right away. Leaving the leaves in the press keeps extracting and pulls out bitterness.
Adjusting Strength and Flavor
If the cup tastes flat, add a little more yerba or steep for 30 seconds longer. If it tastes bitter or astringent, lower the water temperature or shorten the steep. Most people settle on a range between 3 and 4 minutes.
Common Mistakes to Avoid
- Using boiling water, which pulls out harsh tannins and makes the mate taste burnt
- Steeping for too long, often past 5 minutes, which increases bitterness
- Leaving the leaves in the press after plunging, which keeps the brew over-extracting
- Using very fine dust-style yerba, which can slip through the mesh and cloud the cup
- Pressing too quickly, which pushes sediment into your drink
Recommended Gear
A standard glass or stainless french press works well for mate, but a few extras make the process easier:
- A stainless steel french press holds heat better than glass and won’t shatter if you bump it, which helps when you’re pouring hot water quickly. View on Amazon
- A digital kitchen scale makes dosing yerba consistent from batch to batch, which is hard to do by eye with a light, fluffy leaf. View on Amazon
- A variable temperature kettle lets you hit the 170°F to 180°F window precisely instead of guessing after a rest. View on Amazon
FAQ
Can I use a french press for yerba mate without a special filter?
Yes, the standard metal mesh filter works for most loose-leaf mate. If you notice fine particles in your cup, choose a coarser cut of yerba or press more slowly.
Why does my yerba mate taste bitter in a french press?
Bitterness usually comes from water that’s too hot or a steep that runs longer than about 4 minutes. Try cooler water and a shorter steep before changing the amount of leaf.
How much yerba should I use for a single cup?
About 1 tablespoon, or roughly 5 grams, per 8 ounces of water is a reliable starting point. Adjust by small amounts until the strength suits your taste.
Conclusion
Brewing yerba mate in a french press comes down to three things: water between 170°F and 180°F, about 5 grams of leaf per 8 ounces, and a steep of 3 to 4 minutes. Once you have those dialed in, you can fine-tune strength to suit your taste. Keep the leaves out of the cup after pressing, and your mate will stay smooth from first sip to last.
