Updated November 2026
A pour over iced coffee recipe gives you the clarity of a hot pour-over with a crisp, refreshing finish. The trick is brewing a concentrated coffee directly over ice, so the melt dilutes it to the flavor you want. Follow the ratios and steps below and you’ll get a cup that tastes bright and balanced, not thin.
Choose the Right Ratio and Grind
Because ice will melt into the brew, you need to start stronger than you would for a hot cup. A good starting point is a 1:12 ratio of coffee to water, meaning 25 g of coffee and 300 g of water for a 12–14 oz iced drink. Use a medium-fine grind, similar to table salt, which slows the drawdown enough to extract well without bitterness.
Shopping for one? See our guide: 7 Best Pour Over Coffee Dripper Models for Home Brewers (2026).
Brew the Concentrate Over Ice
Set your dripper on a carafe or glass that already holds the ice. Use about 150 g of ice per 300 g of water so the melt will bring the drink to a drinkable strength. Heat water to 200–205°F, which is the range most brewers aim for to pull out sweetness and acidity without harshness. Bloom the grounds with about 50 g of water for 30 seconds, then pour the rest in slow, even circles over the next 2.5 to 3 minutes.
- Weigh 25 g of medium-fine ground coffee.
- Place 150 g of ice in your serving glass or carafe.
- Set a dripper and filter on top and rinse the filter with hot water.
- Add the grounds, then pour 50 g of water at 200–205°F and wait 30 seconds to bloom.
- Pour the remaining 250 g in steady spirals, finishing the drawdown in about 3 minutes.
- Stir gently, taste, and add a splash of cold water or a sweetener if needed.
Adjust Strength and Flavor
Taste the finished drink before you change anything. If it tastes weak, reduce the ice by 20–30 g or use a slightly finer grind. If it tastes sharp or sour, the extraction may be too light, so try a slightly hotter pour or a longer bloom. A lighter roast tends to show more fruit and acidity when iced, while a medium or medium-dark roast gives a rounder, chocolatey cup that holds up well to dilution.
Common Mistakes
- Brewing at normal hot-coffee strength, which leaves the iced cup watery.
- Using too much ice, so the drink is diluted before the last pour finishes.
- Grinding too fine, which slows the drawdown and adds bitterness.
- Skipping the bloom, leaving pockets of dry grounds that brew unevenly.
- Letting the brew sit too long before drinking, which dulls the aromatics.
Recommended Gear
- Hario V60 dripper offers a conical shape that makes it easy to control flow for even extraction. View on Amazon
- Gooseneck kettle gives you precise pour control, which matters for the bloom and steady spirals. View on Amazon
- Digital coffee scale keeps your ratio consistent, so each batch tastes the same. View on Amazon
For more on dialing in the brew itself, see Pour Over Iced Coffee: A Step-by-Step Guide to a Bright, Clean Cup and Pour Over Coffee Grind: A Step-by-Step Guide for Better Flavor.
FAQ
Can I use regular hot-brew ratios for iced pour over?
No. Standard hot ratios produce a drink that becomes watery once the ice melts. Start at about 1:12 and adjust from there.
Should I brew directly over ice or cool the coffee first?
Brewing directly over ice is the simplest method and keeps the flavor fresh. Cooling a hot brew first can work too, but it often tastes flatter.
What if my iced coffee tastes too sour?
Sour usually means under-extraction. Try a slightly finer grind, a hotter water temperature within the 200–205°F range, or a longer bloom.
Conclusion
With the right concentrated ratio, a medium-fine grind, and a controlled pour, this pour over iced coffee recipe gives you a clean, bright cup every time. Use ice to dilute the brew to balance, and adjust one variable at a time until the flavor suits you.
