Updated November 2026
A good pour-over coffee ratio for one cup is about 1:16, meaning 15 grams of coffee for roughly 240 grams of water, which is a standard 8-ounce mug. Follow that ratio with the right grind, water temperature and pour timing, and you will get a clean, balanced cup every time. This guide walks through the numbers, the steps and the adjustments that matter most.
Why the 1:16 Ratio Works for a Single Cup
Ratio describes coffee weight compared to water weight. A 1:16 ratio gives a full-bodied but not heavy cup, and it is the most common starting point in specialty coffee. For a single serving, that means 15 g of ground coffee and 240 g of water. If you prefer a stronger cup, drop to 1:15 by adding about 1 gram more coffee. For a lighter, brighter cup, move toward 1:17 by using about 1 gram less.
Shopping for one? See our guide: 7 Best Pour Over Coffee Dripper Models for Home Brewers (2026).
Measure Your Coffee and Water Accurately
Volume measurements like tablespoons vary widely with bean density and grind size, so weighing is more reliable. A digital scale that reads to 0.1 gram is ideal, but any kitchen scale with a tare function will work. If you only have spoons, roughly 2 to 2.5 level tablespoons of medium-ground coffee come close to 15 grams, though the result will be less consistent.
- Set your scale to grams and place your brewer and filter on top.
- Tare the scale to zero, then add 15 g of freshly ground coffee.
- Heat water to 200–205°F, a range that suits most beans.
Grind Size and Brewing Steps
For a 1:16 brew in a standard cone, a medium-fine grind, similar to table salt, usually performs well. Grind too coarse and the coffee tastes sour and thin. Grind too fine and it turns bitter and muddy. Adjust by small amounts and taste the result.
- Place a paper filter in the cone, rinse it with hot water and discard the rinse water.
- Add the ground coffee and gently level the bed.
- Bloom: pour about 30 g of water in a slow circle to wet all the grounds. Wait 30 to 45 seconds.
- Pour the remaining water in slow, steady circles, reaching 240 g total by about 2:30 to 3:00.
- Let the coffee drain completely. A good total brew time is about 3 to 3.5 minutes.
Adjusting Your Cup After the First Brew
Taste is your guide. If the cup tastes sour or weak, the grind is likely too coarse or the brew too fast, so grind finer. If it tastes harsh or bitter, grind a little coarser or lower the water temperature. Change one variable at a time, and log what you did so you can repeat good results.
| Taste | Likely Cause | Adjustment |
|---|---|---|
| Sour, thin | Under-extracted | Grind finer or pour slower |
| Bitter, harsh | Over-extracted | Grind coarser or cool water slightly |
| Flat, muted | Stale beans or low dose | Use fresher coffee, check weight |
For more detail on tuning bitterness, see Why Is My Pour Over Coffee Bitter: 5 Causes and Fixes for a Smoother Cup. If you are still settling on grind size, Coffee Grind Size for Pour Over: A Step-by-Step Guide for Better Flavor covers the range in more depth. For temperature, Water Temperature for Pour Over Coffee: 200–205°F for Balanced Flavor explains why small changes matter.
Recommended Gear
- Hario V60 Coffee Pour Over Kit: A cone and server pairing that makes single cups easy to brew and clean. View on Amazon
- Digital coffee scale with timer: Weighing both coffee and water keeps your ratio consistent from cup to cup. View on Amazon
- Burr grinder: Even particles extract evenly, which makes flavor more predictable. View on Amazon
Common Mistakes to Avoid
- Measuring coffee by volume instead of weight, which causes inconsistent strength.
- Using water that is off the boil for too long, which can cool below your target range.
- Skipping the rinse, which can leave a papery taste.
- Pouring too fast, causing channeling and uneven extraction.
- Using stale beans. Use coffee within a few weeks of its roast date for the best flavor.
FAQ
How much coffee do I use for a single pour-over cup?
Use about 15 grams of coffee for a standard 8-ounce cup, which matches a 1:16 ratio with 240 grams of water. Adjust by a gram or so to suit your taste.
Can I use tablespoons instead of a scale?
You can, but roughly 2 to 2.5 level tablespoons of medium-ground coffee is only an estimate. Weighing gives much more consistent results.
Why does my pour-over ratio taste different from day to day?
Changes in grind size, bean freshness and water temperature all affect flavor. Weigh your inputs and keep notes to track what changes the taste.
Conclusion
A 1:16 pour-over ratio, about 15 grams of coffee to 240 grams of water, is a reliable starting point for one cup. Dial in your grind and temperature from there, and let taste guide small adjustments. With a scale and a few consistent steps, your single cups will become much more repeatable.
