Updated November 2026
Starbucks Pike Place Medium Roast Whole Bean Coffee is a versatile everyday blend with cocoa and toasted nut notes and a smooth, moderate body. With a few adjustments to grind size, dose and water temperature, you can get a clean, balanced cup from any brewer you own. This guide walks you through the setup that works best for this roast.
Start With the Right Grind Size
Grind size controls how fast water pulls flavor from the coffee, so it matters more than anything else on this list. Whole beans lose their aroma quickly after grinding, so grind only what you need right before brewing.
- Pour-over (cone or flat-bottom): medium, similar to sand.
- Drip machine: medium, slightly finer than pour-over if your brew runs long.
- French press: coarse, like coarse sea salt.
- Espresso: fine, but this blend is usually better suited to filter methods.
Measure Your Ratio and Water Temperature
A standard starting ratio is 1:16, meaning 1 gram of coffee for every 16 grams of water. For a 12-ounce mug, that works out to roughly 22 grams of coffee and 340 grams of water. Adjust from there: use slightly more coffee if the cup tastes thin, and slightly less if it tastes bitter.
Heat water to between 195°F and 205°F. Water that is too hot can pull out bitterness from a medium roast, while water that is too cool tends to taste sour and flat. Let boiling water sit for 30 seconds before pouring if you do not have a thermometer.
Follow a Step-by-Step Brew Process
- Weigh your beans and water, or measure by volume if you do not have a scale.
- Grind the beans to the size that matches your brewer.
- Rinse your paper filter with hot water to remove papery taste and preheat the vessel.
- Add the grounds, make a shallow well, and pour about twice their weight in water to bloom for 30 to 45 seconds.
- Pour the rest of the water in slow, steady circles over 2 to 3 minutes for pour-over, or steep for 4 minutes for French press.
- Serve immediately, since flavor fades quickly once the brew sits on heat.
Adjust for Your Brewing Method
Each brewer draws out flavor at a different pace, so the same beans can taste very different from method to method. Use the table below as a starting point, then change one variable at a time so you know what caused the change in taste.
| Method | Grind | Ratio | Brew Time |
|---|---|---|---|
| Pour-over | Medium | 1:16 | 2:30 to 3:30 |
| Drip machine | Medium | 1:15 to 1:17 | 5 to 6 minutes |
| French press | Coarse | 1:14 to 1:15 | 4 minutes |
If you want a deeper look at how roast level affects these settings, see Medium Dark Roasted Coffee Beans: How to Choose and Brew Them (2026). For comparisons with other Starbucks bags, Starbucks Pike Place Roast Whole Bean Coffee Review: Who Is It For? covers the flavor profile in more detail.
Common Mistakes
- Grinding too far in advance, which flattens the aroma within days.
- Using water straight off a rolling boil, which can make the cup harsh.
- Skipping the bloom, which traps gas and leads to uneven extraction.
- Changing grind, ratio and temperature at the same time, which makes problems hard to diagnose.
- Storing beans in a clear container on the counter, where light and heat speed up staling.
Recommended gear
A burr grinder gives a more even grind than a blade grinder, which makes it easier to hit the right size for your brewer. View on Amazon
A gram scale lets you repeat a recipe exactly, so you can tell whether a change in taste came from your technique or from the coffee itself. View on Amazon
A gooseneck kettle gives you steady control over the pour, which helps even out extraction in pour-over brewing. View on Amazon
FAQ
What grind size should I use for Pike Place Roast in a drip machine?
Start with a medium grind, similar to sand. If the coffee tastes sour or weak, go slightly finer; if it tastes bitter or harsh, go slightly coarser.
Does this coffee taste good as cold brew?
Yes, a coarse grind steeped in cold water for 12 to 18 hours produces a smooth, low-acid concentrate. Dilute it with water or milk after straining.
How should I store whole beans to keep them fresh?
Keep them in an airtight, opaque container away from heat and sunlight. Grind just before brewing for the best aroma.
Conclusion
Starbucks Pike Place Medium Roast Whole Bean Coffee rewards a careful setup: a medium grind for filter brewing, a ratio near 1:16, and water between 195°F and 205°F. Change one variable at a time, and you will quickly find the cup that suits your brewer and your taste.
