Updated November 2026

A one cup coffee pour over is one of the simplest ways to get a clean, balanced brew without any special equipment beyond a dripper, a filter, and a kettle. This guide walks you through the exact ratio, grind size, water temperature, and pour technique you need to make a single great cup at home. Follow the steps once and you will have a repeatable method you can adjust to your taste.

Start With the Right Ratio and Grind

For a single cup, a good starting point is 15 grams of coffee to 250 grams of water, a ratio of about 1:16. That yields roughly a 10-ounce mug after some water is absorbed by the grounds. If you want a stronger cup, drop the water to 220 grams. If the result tastes thin or sour, try a finer grind. If it tastes harsh or dry, go coarser.

Shopping for one? See our guide: 7 Best Pour Over Coffee Dripper Models for Home Brewers (2026).

Grind your beans just before brewing, aiming for a medium-fine texture similar to table salt. Pre-ground coffee loses aromatics quickly, so grinding fresh is one of the easiest upgrades you can make. For more detail on dialing in texture, see Pour Over Coffee Grind: A Step-by-Step Guide for Better Flavor.

Dial In Your Water Temperature

Heat water to between 200°F and 205°F. Boiling water, around 212°F, can over-extract and leave a bitter edge, while cooler water tends to produce sour, underdeveloped flavor. If your kettle does not display temperature, bring water to a boil and let it rest for about 30 seconds before pouring. You can read more about temperature targets in Water Temperature for Pour Over Coffee: 200–205°F for Balanced Flavor.

Brew the One Cup Pour Over Step by Step

  1. Place a paper filter in your dripper and rinse it with hot water. Discard the rinse water. This removes paper taste and preheats the vessel.
  2. Add 15 grams of freshly ground coffee and level the bed gently.
  3. Bloom: pour about 30 grams of water evenly over the grounds and wait 30 seconds. You should see the coffee swell and release gas.
  4. Pour in slow, circular motions, bringing the total water up to 250 grams by about the 2:30 mark.
  5. Let the water drain fully. A complete brew should finish between 2:45 and 3:30.
  6. Remove the dripper, stir gently, and serve.

If you prefer a more detailed walkthrough, How to Make Pour Over Coffee: 6 Steps to a Clean, Sweet Cup covers each stage with additional tips.

Quick Reference for One Cup Pour Over Coffee

Variable Starting Point Adjust If
Coffee 15 g Stronger taste: add 1–2 g
Water 250 g Stronger cup: use 220 g
Temperature 200–205°F Sour: go hotter; bitter: go cooler
Grind Medium-fine Sour or thin: finer; harsh: coarser
Total time 2:45–3:30 Fast: grind finer; slow: grind coarser

Common Mistakes to Avoid

  • Skipping the filter rinse, which can leave a papery taste in the cup.
  • Pouring too fast or from too high, causing uneven extraction.
  • Using stale beans. Coffee is best within a few weeks of roasting.
  • Changing several variables at once. Adjust one thing per brew so you can tell what made the difference.
  • Letting the bed dry out before the brew finishes, which can produce uneven flavor.
  • Hario V60 dripper: A ribbed, cone-shaped dripper that makes it easy to control flow for a single cup. View on Amazon
  • Digital kitchen scale: Measuring in grams is the most reliable way to keep your ratio consistent from brew to brew. View on Amazon
  • Gooseneck kettle: A narrow spout gives you precise control over pour speed and placement. View on Amazon

FAQ

How much coffee do I need for one cup pour over?

A common starting point is 15 grams of coffee for about 250 grams of water. Adjust up or down to match your preferred strength.

Do I need a gooseneck kettle to make pour over coffee?

No, but a gooseneck kettle makes it easier to pour slowly and evenly. Any kettle that lets you control the stream will work.

How long should a one cup pour over take?

A typical brew finishes in about 2:45 to 3:30 from the start of the first pour. Faster brews often need a finer grind, while slower ones usually need a coarser grind.

Conclusion

A one cup coffee pour over comes down to a few controllable variables: a 1:16 ratio, a medium-fine grind, and water between 200°F and 205°F. Start with the steps above, then change one variable at a time to find the flavor you like best. With a little practice, a single cup can be just as satisfying as a full pot.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our coffee beans & brewing methods guides, checking product details against manufacturer specifications and owner feedback.