Updated November 2026
A pour over coffee calculator helps you work out how much coffee and water to use so your brew tastes balanced instead of weak or harsh. You enter the amount you want to make, and it gives you the dose, the water weight, and a sensible target for brew time. This guide shows you how to use those numbers and how to adjust them once you taste the result.
Start With the Brew Ratio
Most pour over recipes start with a ratio of coffee to water by weight. A common starting point is 1:16, meaning 16 grams of water for every gram of coffee. Lighter ratios such as 1:17 or 1:18 produce a cup with more body, while stronger ratios like 1:15 push the flavor and intensity higher. A calculator simply multiplies your dose by the ratio so you do not have to do the math while your kettle is heating.
Shopping for one? See our guide: 7 Best Pour Over Coffee Dripper Models for Home Brewers (2026).
Weigh everything. Volume measurements such as scoops or tablespoons vary too much with grind size and bean density to give repeatable results.
Use the Calculator to Set Your Dose and Water
Decide how many cups you want, then enter that total into the calculator. For a single 12-ounce mug, a dose of about 20 grams of coffee and roughly 320 grams of water at 1:16 is a typical starting point. Scale the numbers up or down as needed, and keep the ratio fixed while you change the batch size.
- Choose your target ratio, such as 1:16.
- Enter the coffee dose or the total cup size, depending on the calculator.
- Note the water weight and the total brew time target.
- Weigh the coffee and water to the nearest gram before you start.
Match Grind Size and Brew Time to the Numbers
The calculator gives you quantities, but grind size controls how fast water moves through the coffee. A medium-fine grind, similar to table salt, usually finishes in about three to four minutes. If your brew drains in under two minutes, the grind is probably too coarse and the cup may taste sour. If it takes longer than five minutes, the grind is likely too fine and the cup may taste bitter.
Pour in stages. Many brewers bloom the grounds with about twice their weight in water for 30 seconds, then add the rest in two or three pours, finishing near your target time. For more on grind choices, see Coffee Grind Size for Pour Over: A Step-by-Step Guide for Better Flavor.
Adjust Based on Taste
Once you have a baseline, change one variable at a time. If the cup tastes sour or thin, grind finer or use a slightly lower ratio. If it tastes bitter or dry, grind coarser or add a little more water. Keep notes on each brew so you can repeat what worked. Water temperature matters too, and a range of about 200 to 205°F suits most light and medium roasts; see Water Temperature for Pour Over Coffee: 200–205°F for Balanced Flavor for details.
Tools You Will Need
- A digital scale that reads in grams
- A burr grinder for consistent particle size
- A gooseneck kettle or a kettle with a controlled spout
- A dripper, paper filters, and a carafe or mug
- A timer
Common Mistakes
- Measuring coffee by volume instead of weight, which leads to inconsistent brews.
- Changing the grind and the ratio at the same time, which makes it hard to tell what caused a flavor shift.
- Pouring water too fast, which can channel through the bed and under-extract the coffee.
- Using stale beans. Coffee tends to taste flat within a few weeks of roasting, so calculations cannot fix old beans.
- Ignoring the timer. A consistent brew time is one of the fastest ways to improve repeatability.
Recommended Gear
A reliable scale is the single most useful tool for making calculator numbers work. Look for one that reads in one-gram increments and has a built-in timer. View on Amazon
A burr grinder gives a more even grind than a blade grinder, which makes the flow rate predictable. View on Amazon
A gooseneck kettle lets you pour slowly and steadily, helping you hit your target brew time. View on Amazon
FAQ
What ratio should I start with in a pour over coffee calculator?
Start with 1:16 by weight, which is a balanced default for most coffees. Adjust from there based on how the cup tastes.
Do I need a special calculator app?
No. Any simple calculator works if you know the ratio. Many coffee scales also have built-in ratio modes that do the math for you.
Why does my brew finish too fast even with the calculator numbers?
The grind is probably too coarse. Grind a little finer and keep the water weight and ratio the same to see how the flow changes.
Conclusion
A pour over coffee calculator takes the guesswork out of dose and water, so you can focus on grind, pour technique, and taste. Start at 1:16, weigh everything, and make one change at a time. With a few brews, you will know which numbers suit your beans and your palate.
